| The best way to customize your boat or yacht is by | | | | Leave the Boat Graphics lying flat for 24 hours to help |
| giving it its identity like boat name, boat logo, boat | | | | them flatten out before application. |
| registration number or by simply decorating it with | | | | Methods of Installation - there are two methods of |
| marine graphics. This will personalize your boat and | | | | installation being the Wet Method and the Dry Method. |
| also add to its beauty. If you have planned to try your | | | | The former method is used for shiny surface like fiber |
| hand on boat stickers and would like to design it on | | | | glass and boats with chines, whereas the latter |
| your own, try the DIY program (Design It Yourself) | | | | method is used for unpainted aluminum or surface |
| where you can chose from different kind of font | | | | which is likely to trap fine layer of water. |
| styles, size and colors which suits you best. Designing | | | | Installation - Clean the surface you want to place the |
| graphics is also done similarly. There are online sites | | | | Boat Graphics, thoroughly. Place a piece of masking |
| providing these services where you can design your | | | | tape on one of the top corners of your Boat Graphic |
| own boat lettering, which are delivered to you with | | | | and without removing the backing paper, stick the |
| installation instructions and materials which guides you | | | | sticker on your vessels in the position you want. Slowly |
| through the process. | | | | peel the backing away from the graphic not allowing |
| Where on one hand designing is simple, on the other | | | | the exposed adhesives to get in contact with anything |
| hand care has to be taken while installing the boat | | | | until the Application Fluid is applied. Now spray the |
| decals. Here are few instructions to be followed to get | | | | sticky side of the graphic with the fluid to make the |
| the graphics safely on your boat without spoiling the | | | | positioning of the graphic easy and also avoids it to |
| surface. | | | | stick to anything which touches it immediately. |
| What You Need - the materials include plastic | | | | Then use firm strokes with plastic squeegee to force |
| squeegee and application fluid which are normally | | | | the application fluid out from beneath the individual |
| provided along with the ordered sticker, a measuring | | | | letters. Continue for around 20-30 seconds, ensuring |
| tape, masking tape and a dry cloth. The boat graphic | | | | you cover the entire area. Now leave the Graphic to |
| decal will consist of three layers - top layer of | | | | dry for at least 20 minutes before progressing to the |
| application tape, middle layer of the graphic itself and | | | | final step. The final step is of removing of application |
| the bottom layer of backing paper. Remove the Boat | | | | tape for which you might require to spray application |
| Graphic and lay it flat on any hard surface with the | | | | fluid to make it process smooth. Wait for sometime n |
| application tape facing upwards. Hold the sticker tight | | | | then pull the Graphic carefully without the transfer tape |
| so that spreading of plastic squeegee across the top | | | | or else you will have to wait longer for the graphic to |
| of the graphic can be done evenly. This is done to | | | | dry. Congratulations! You have now successfully |
| ensure the graphic is stuck on the application tape. | | | | installed your shiny new Boat Graphic. |